Water Bath Exporters, Water Bath - Water Bath Manufacturers, Water Bath Exporters Suppliers Wholesalers. Water Bath (Single Walled)

Water Bath Exporters - Scientific Laboratory Equipment
Manufacturer and Exporters of Scientific Lab Equipments

WATER BATH

SEROLOGICAL WATER BATH

Double wall construction, inner being made out of highly polished thick stainless steel and outer made out thick mild steel sheet finished in stoving white enamel paint or staple mat colour combinations.

The gap is filled with special glass wool for temperature insulation.

The bath is provided with a drain cock to easily drain out the water and clean the chamber when required. A pyramidal shaped cover is provided.

Immersion type heating elements are fitted at bottom. temperature range 5ºC above ambient to 80ºC with accuracy ±0.5ºC to 1ºC is controlled by capillary thermostat regulated by a graduated knob on the panel, which is also provided with pilot lamp etc.

The equipments is workable on 220Volts, 50Hz single phase AC. The baths are supplied without thermometer and stirring arrangement.

Working chamber sizes in mm (Stainless Steel)

a) 300 x 175 x 175
b) 300 x 250 x 175
c) 375 x 300 x 175
d) 450 x 300 x 175

Additions Avaliable:

i) Stirring arrangement with S.S. rod and blades.
ii) Digital temperature indicator.
iii) Digital indicator-cum-temperature controller.

WATER BATH RECTANGULAR (Thermostatic Control)

Standard double wall construction, inner being stainless steel outer of mild steel duly stoving paint finish and gap filled for temperature insulation with special grade glass wool. top cover with 75mm holes with concentric rings. temperature range 5ºC above ambient to 95ºC controlled by a thermostat. Heating is attained by an immersion type element with accuracy of ±1ºC.

Supplied complete with plug & cord. Panel provided with pilot lamps, thermostat control knob etc.

Models: a) 5 holes, b) 6 holes, c) 12 holes

WATER BATH RECTANGULAR (SINGLE WALL)

Body made out thick stainless steel. top made out of chrome plated sheet. Concentric rings to cover 3” dia holes are provided.

Heating elements have automatic cut-off device which operates when the bath gets dried.

Equipment working on 220Volts Hz single phase AC.

a) 6 holes
b) 12 holes

OPTIONALS : (Extra cost)

I) Digital temperature indicator.
ii) Digital temperature indicator-cum-controller.

WATER BATH PRECISION

CONSTANT TEMPERATURE CONTROL - Body made out thick stainless steel. top made out of chrome plated sheet. Concentric rings to cover 3” dia holes, with glass windows on both opposite sides, for observation. temperature controlled by mercury contact thermometer with a sensitivity of 2ºC.

Suitable for precision laboratory activities requiring constant temperature with high degree of accuracy.

Complete with stirrer with speed control regulator workable on 220Volts Hz single phase AC.

Chamber Size in mm

a) 425x250x225
b) 450x375x375
c) 600x450x450

WATER BATH PARAFFIN

Body specification as per standard double wall water baths but provided with cups and sleeves for glass tubes.

Models:

a) 4 cups & 6 sleeves.
b) 6 cups & 8 sleeves.
c) 12 cups & 14 sleeves.

WATER BATH TISSUE FLOTATION

Suitable to spread wax section ribbons after microtomy to get wrinkle free specimen for staining. Double wall round construction. Inner chamber black anodized aluminium and outer made out of mild steel duty finished in stoving white enamel paint.

Inner chamber is single stainless pieces to avoid chances of any leakage with enough wide rim for drying wet slides. temperature range 5ºC above ambient to 70ºC ±2ºC. Immersion type heating elements attain the controlled temperature regulated by a capillary thermostat.

Panel provided with thermo-regulator knob, pilot lamp and is supplied with cord & plug.

Equipment workable on 220Volts Hz single phase AC.

Chamber sizes in mm & inches:

a) 200x75

b) 250x125